1. Measure the space you wish to
put the wine rack into, consider skirting boards.
2. To convert your measurements to bottle spaces consult the
chart. Take the nearest size under your measurement. For
example if you have 1000mm the number of bottles would be 10
(974mm). These sizes apply to both the vertical and the
horizontal dimensions of the racks. Allow room for a
bottle to fit on top.
Larger bottles 1.5ltr will fit on
top, Magnum every second row.
3. Multiply the vertical
number by the horizontal number to give the total number of
bottles.
4. Email us
wineracks@wineracks.nz with your
rack requirements to get a quote including freight.
With Larger racks, keep in
mind, access to the installation area. Should that access be
difficult we can make the rack in sections to facilitate
installation.
Where racks meet at right
angles in corners allow 450mm clearance between the racks for
removal of bottles.
Corner Units can be placed at
right angles allow 700mm from each side, these would be joined
with the straight wall racks to view as one complete rack.
The racks are 200mm in depth,
single bottle rack. 500mm in depth double bottle and 300mm in
depth for display bottle rack.
wine rack kit set instructions .pdf
FACTORY
SHOWROOM
Unit D
9
Tait Place
Albany
Telephone: +64 9 415 0816
Facsimile: +64 9 415 0817
Email:
wineracks@wineracks.nz
|
